Uula Furniture Paint, semi-matt

A durable paint for furniture and other interior surfaces. Water-based. The binder is made with renewable natural oils only. Plastic free.
Completely free of VOC emissions. The paint contains no volatile organic compounds. The paint carries a certificate for low emission building materials, M1.

Intended use: For interior wooden surfaces, chipboards and fibreboards. Furniture, doors, battens, window panes, cupboards etc.
Colors: White A & C tinting bases. Tints made to A- and C-bases according to Uula colour charts. Can also be tinted according to most common colour charts.
Gloss grade: Semi-matt (PH: puolihimmeä)
Coverage: Approx 7 m2/L depending on the coarseness and porosity of the surface.
Application: Ordinary paint brush, mohair roller paint sprayer.
Conditions: The surface to be painted must be dry, the relative air humidity below 80 % and the temperature at least +10°C.
Drying time: Tack-free ~30 minutes. A new coat of paint can be applied after ~2 hours.
Washability class : SFS 3755 Over 2000 brushes Surface achieves its full hardness in one month.
Density: ~1,3 kg/l.
Cleaning of equipment: Clean the equipment with soap and water right after you have finished painting.
Storage and disposal: Keep in a cool and dry place. NOT ALLOW TO FREEZE!
Waste disposal: Empty metal cans are reusable. Liquid waste must be taken to a municipal hazardous waste collection point. Contains 2-methyl-1,2-benzothiazol-3(2H)-one. May produce an allergic reaction.

PAINTING INSTRUCTIONS

Unpainted surface: Clean from dust. Wash dirty surfaces with Uula Washing Agent following the instructions. Allow to dry thoroughly before painting. Treat knots with shellack if necessary. Level all cracks and holes in the surface with putty if necessary. Prime new wooden surfaces with Uula Primer Apply one or two coats of Uula Furniture Paint. Thin with water if necessary.

Old painted surface: Remove peeling and flaking old paint. Sand a glossy or hard surface with a sandpaper to ensure adhesion. Wash dirty surfaces with Uula Washing Agent following the instructions. Allow to dry thoroughly before painting. Level all cracks and holes in the surface with putty if necessary. Apply one or two coats of Uula Furniture Paint. Thin with water if necessary.

NOTES
Stir well before and during painting Reserve enough paint for a large surface in order to avoid potential colour variations in different batches.

Information in the technical specification is based on tests and practical experience. All instructions are only indica- tive and depend, for example, on the texture of the surface, quality, colour and previous treatments. Because we cannot control the use and working conditions of our products we take responsibility only for the quality of the product and guarantee that it is in accordance with the high standards. Producer or reseller do not take responsibility for damage caused by using the product against our instructions or intended use.