Ring Remover

Ring Remover will remove most white heat and water marks from highly polished, hard surfaces, including varnish, French polish lacquer and modern hard finishes. It is suitable for use on teak, and will revive and shine most finishes.Areas of application: Ring Remover can be used on most polished surfaces indoors.

APPLICATION:
Shake well before use.
Apply using a clean, lint-free cotton cloth and rub vigorously in a circular motion over the mark until it is removed. Buff with a clean, dry cotton cloth then wax or polish as normal.

Precautions
Ring Remover may produce a shiny surface when used on matt or satin finishes. If this occurs gently matt back the surface with Ultra Fine (0000) Steel Wool and re-wax with Black Bison Paste Wax. White marks made by water or heat on waxed surfaces may be removed using Wax and Polish Remover. Dark marks made by water or heat indicate damage to the wood. The finish may need to be completely removed so the bare wood can be treated with Wood Bleacher.

IMPORTANT
Always test the product on a spare surface or inconspicuous area for colour, compatibility and end results.

Safety: Substance is flammable! Harmful if swallowed! Repeated contact might cause skinn irritation. Keep out of reach from children. Use in a ventilated room. If swallowed do not induce vomiting. Seek medical aid immediatley.