Uula Floor Paint

Beautiful & traditional paint for floors and other interior surfaces.
Uula Floor Paint is made of natural resins and linseed oil alkyd. Aromatic-free hydrocarbon solvent.
Two gloss grades: Silky matt and semi-glossy

Intended use: Interior wood and wood-fibre board. Suitable also for different stone surfaces in dry interiors.
Technical qualities:
Gloss grade: Semi-glossy.
Density 1.12 kg/L.
VOC emissions under 300g/l.
EU VOC -limit value: (cat A/i) 300g/L (2010).
Colours: See Uula Traditional Colour Chart, special tints can be made to order.
Uula Linseed Oil Paint is tinted with colour pastes made from genuine colour pigments.
Application & conditions
Paint brush, mohair roller or lacquer spatula.
The surface to be painted must be dry, the humidity of the wood below 15 %, the relative air humidity below 80 % and the temperature at least +10°C.
Drying time: At 20°C and <50 % relative humidity: Tack-free in 6 hours.
A new coat can be applied after 24 hours, hardening continues for one month.
Note: Heat and light accelerate drying.
Coverage: 10–12 m2/L.
Thinner: Uula Universal Thinner
Cleaning of equipment:
Clean the equipment with Uula Universal Thinner or petroleum spirit and rinse with soap
and water.
Container sizes: 0.9 L, 2.7 L, 9 L
Storage & disposal:
Keep in a cool and dry place. Keep out of the reach of children. Does not freeze.
Dry and empty containers can be taken to a refuse dump. Liquid waste must be taken to a municipal hazardous waste collection point.
Fire classification: Non-flammable.
Caution: Linseed oil on cleaning rags etc. may catch fire by itself. Oily rags and cloths etc.
should be burned or rinsed in water before putting into refuse bins.

Painting instructions

Remove dust from the surface to be treated. Remove loose old paint with a scraper and sand the surface. Brush off dust, fill cracks and holes, remove nail heads. Wash dirty surfaces with Uula Washing Agent following the instructions. Allow to dry thoroughly before treating.
Paint new wood floors with Uula Floor Paint that has been thinned 20 % and previously painted floors with Uula Floor Paint that has been thinned 10 % with Uula Universal Thinner. Paint thin layers and let it dry.
Finishing coat
Paint 1–2 coats with Uula Floor Paint and thin with Uula Universal Thinner if necessary.
Further treatment of the surface
Be really careful with all painted surfaces during the first month. Clean the surface only with soft rags and sponges that do not scratch the surface. Use only neutral washing agents. Rinse the surfaces carefully.

Points to note

  • Reserve enough paint for a large surface in order to avoid potential colour
    variations in different batches.
  • The paint must always be stirred well before and during use.
  • It is distinctive of oil paints in light colours to turn yellowish in the dark.
  • In all cases of uncertainty, please contact the manufacturer or a competent distributor before use.

Additional information


0,9 L, 2,7 L, 9 L


00 White, 1001 Pouta, 1006 Kaste, 1011 Sade, 1018 Pilvi, 1020 Uni, 1509 Usva, 1512 Naava, 1515 Savi, 1518 Laava, 2006 Vanilja, 2009 Olki, 2012 Nauris, 2015 Kaer (Kaura), 2018 Tähkä, 2020 Okra, 3006 Virsik (Persikka), 3009 Koralli, 3012 Aprikoosi, 3015 Pihka, 3018 Ruska, 3022 Syksy, 4006 Vanamo, 4009 Kahvi, 4015 Kaarna, 4040 Terra, 4106 Ruusu, 4115 Kanerva, 4117 Vadelma, 4200 Puolukka, 5016 Pellava, 5030 Savu, 5204 Hamppu, 5406 Hiekka, 5409 Kaakao, 6114 Lemmikki, 6318 Utu, 6320 Safiiri, 7018 Meri, 8312 Purjo, 8318 Oliivi, 8340 Vesiheinä, 8390 Lehmus, 8409 Minttu, 8412 Rypäle, 8415 Oras, 8506 Helmi, 8509 Jäkälä, 8515 Varpu, 8518 Kaisla